Details, datasheet, quote on part number: IDT54FCT162952ATPA
PartIDT54FCT162952ATPA
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionFast CMOS 16-bit Registered Transceiver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162952ATPA datasheet
  

 

Features, Applications

0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1µA (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) Balanced Output Drivers (±24mA) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25°C Power off disable outputs permit "live insertion" Available in SSOP and TSSOP packages

The FCT162952T 16-bit registered transceiver is built using advanced dual metal CMOS technology. These high-speed, low-power devices are organized as two independent 8-bit D-type registered transceivers with separate input and output control for independent control of data flow in either direction. For example, the A-to-B Enable (xCEAB) must be low to enter data from the A port. xCLKAB controls the clocking function. When xCLKAB toggles from low-to-high the data present on the A port will be clocked into the register. xOEAB performs the output enable function on the B port. Data flow from the B port to A port is similar but requires using xCEBA, xCLKBA, and xOEBA inputs. Full 16-bit operation is achieved by tying the control pins of the independent transceivers together. The FCT162952T have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times­reducing the need for external series terminating resistors. The is a plug-in replacement for the FCT16952T and ABT16952 for on-board bus interface applications.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max to +120 Unit °C mA

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXX Output and I/O terminals. 3. Output and I/O terminals for FCT162XXX.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names x OEAB x OEBA x CEAB x CEBA xCLKAB xCLKBA xAx xBx Description A-to-B Output Enable Input (Active LOW) B-to-A Output Enable Input (Active LOW) A-to-B Clock Enable Input (Active LOW) B-to-A Clock Enable Input (Active LOW) A-to-B Clock Input B-to-A Clock Input A-to-B Data Inputs or B-to-A 3-State Outputs(1) B-to-A Data Inputs or A-to-B 3-State Outputs(1)

NOTE: 1. A-to-B data flow is shown: B-to-A data flow is similar but uses xCEBA, xCLKBA, and xOEBA. 2. Level of B before the indicated steady-state input conditions were established. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care = LOW-to-HIGH Transition Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Industrial: to +85°C, VCC 5.0V ±10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(4) Input HIGH Current (I/O pins)(4) Input LOW Current (Input pins)(4) Input LOW Current (I/O pins)(4) High Impedance Output Current (3-State Output pins)(4) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = ­18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. ­80 Typ.(2) Max. mV µA Unit V µA

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. IOH = ­24mA VIN = VIH or VIL VCC = Min. IOL = 24mA VIN = VIH or VIL Min. 2.4 Typ.(2) Max. ­200 0.55 Unit mA V

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25°C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. This test limit for this parameter = ­55°C.


 

Related products with the same datasheet
IDT54FCT162952ATE
IDT54FCT162952ATEB
IDT54FCT162952ATPAB
IDT54FCT162952ATPF
IDT54FCT162952ATPFB
IDT54FCT162952ATPV
IDT54FCT162952BT
IDT54FCT162952BTE
IDT54FCT162952BTEB
IDT54FCT162952BTPA
IDT54FCT162952BTPAB
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162952ATPAB Fast CMOS 16-bit Registered Transceiver
IDT54FCT162952DT
IDT54FCT162952ET
IDT54FCT162H244 Fast CMOS 16-bit Buffer/line Driver
IDT54FCT162H244AT
IDT54FCT162H244ATE
IDT54FCT162H244CT
IDT54FCT162H244CTE
IDT54FCT162H244ET
IDT54FCT162H244ETE
IDT54FCT162H244T
IDT54FCT162H244TE
IDT54FCT162H245 Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245AT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ATE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245CT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245CTE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ETE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245T Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245TE Fast CMOS 16-bit Bidirectional Transceiver

IDT74ALVCH16525 : Bus Oriented Circuits 3.3v CMOS 18-bit Registered Bus Transceiver With 3-state Outputs And Bus-hold

IDT74FCT373CEB : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS Octal Transparent Latch

ICS9UMS9633BFILFT : Clock/timing - Application Specific Integrated Circuit (ics) Fanout Buffer (Distribution) Tape & Reel (TR) 1.425 V ~ 3.465 V; IC CLOCK PC ULTRA MOBILE 48-SSOP Specifications: Type: Fanout Buffer (Distribution) ; PLL: Yes ; Main Purpose: Utra Mobile PC (UMPC) ; Input: Crystal ; Output: Clock ; Number of Circuits: 1 ; Ratio - Input Output: 1 9 ; Differential - Input Output: No/Yes ; Frequency - Max: 166.67MHz ; Voltage - Supply: 1.425 V ~ 3.465 V ; Operatin

IDT74FCT16952ATPVG8 : Bus Oriented Circuits Fast CMOS 16-bit Registered Transceiver

IDTQS74FCT2157CTS1 : FCT SERIES, DUAL 4 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO16 Specifications: Output Characteristics: TRUE ; Supply Voltage: 5V ; Package Type: SOIC, SOIC-16 ; Logic Family: CMOS ; Number of Pins: 16 ; Inputs: 4 ; Propagation Delay: 4.5 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F)

70T3599S133BFI : 128K X 36 DUAL-PORT SRAM, 15 ns, PBGA256 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, 17 X 17 MM, 1.40 MM HEIGHT, 1 MM PITCH, BGA-256 ; Pins: 256 ; Supply Voltage: 2.5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

71256SA12TPG8 : 32K X 8 STANDARD SRAM, 12 ns, PDSO28 Specifications: Memory Category: SRAM Chip ; Density: 262 kbits ; Number of Words: 32 k ; Bits per Word: 8 bits ; Package Type: TSOP, GREEN, TSOP1-28 ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 12 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

9159M-14LF : 66.6 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO28 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, SOIC, 0.300 INCH, SOIC-28 ; Supply Voltage: 3 to 3.7 volts ; Frequency: 20 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

 
0-C     D-L     M-R     S-Z