Details, datasheet, quote on part number: IDT54FCT162841ETPVB
PartIDT54FCT162841ETPVB
CategoryLogic => Latches => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS 20-bit Transparent Latch
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162841ETPVB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1µ A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85°C VCC 5V ±10% Balanced Output Drivers: ±24mA (commercial) ±16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25°C

The FCT162841AT/BT/CT/ET 20-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary data storage. They can be used for implementing memory address latches, I/O ports, and bus drivers. The Output Enable (OE) and Latch Enable (LE) controls are organized to operate each device as two 10-bit latches or one 20-bit latch. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT162841AT/BT/CT/ET has balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times­reducing the need for external series terminating resistors. The is a plug-in replacement for the FCT16841AT/BT/CT/ET and ABT16841 for on-board interface applications.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xDx xLE xOE xQx Description Data Inputs Latch Enable Input (Active HIGH) Output Enable Input (Active LOW) 3-State Outputs

NOTES: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance 2. Output Level before xLE HIGH-to-LOW transition.

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85°C, VCC 5.0V ±10%; Military: to +125°C, VCC 5.0V ±10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = ­18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. ­80 Typ.(2) Max. mV µA Unit V µA

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = ­16mA MIL. IOH = ­24mA COM'L. IOL = 16mA MIL. IOL = 24mA COM'L

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25°C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55°C.


 

Related products with the same datasheet
IDT54FCT162841ETE
IDT54FCT162841ETEB
IDT54FCT162841ETPA
IDT54FCT162841ETPAB
IDT54FCT162841ETPF
IDT54FCT162841ETPFB
IDT54FCT162841ETPV
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162952 Fast CMOS 16-bit Registered Transceiver
IDT54FCT162952AT
IDT54FCT162952DT
IDT54FCT162952ET
IDT54FCT162H244 Fast CMOS 16-bit Buffer/line Driver
IDT54FCT162H244AT
IDT54FCT162H244ATE
IDT54FCT162H244CT
IDT54FCT162H244CTE
IDT54FCT162H244ET
IDT54FCT162H244ETE
IDT54FCT162H244T
IDT54FCT162H244TE
IDT54FCT162H245 Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245AT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ATE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245CT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245CTE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ETE Fast CMOS 16-bit Bidirectional Transceiver

IDT70P34L25PF : 4K X 18 1.8V Asynchronous Dual-port RAM

IDT70V261L25PFI : Multi-Ports 16K X 16 3.3V Dual-port RAM W/int

IDT7140LA35JGB : HIGH Speed 1K X 8 Dual-port Static SRAM

IDT54244TD : FAST CMOS Octal Buffer/line Drivers

IDTSTAC9758XXTAEB1XR : Interface - Codec Integrated Circuit (ics) Audio Codec '97 Tape & Reel (TR) 3.14 V ~ 3.47 V; 4.75 V ~ 5.25 V; IC CODEC AC'97 6CH 2.3 48-TQFP Specifications: Type: Audio Codec '97 ; Number of ADCs / DACs: 2 / 3 ; Dynamic Range, ADCs / DACs (db) Typ: - ; S/N Ratio, ADCs / DACs (db) Typ: - ; Resolution (Bits): 20 b ; Voltage - Supply, Analog: 3.14 V ~ 3.47 V; 4.75 V ~ 5.25 V ; Voltage - Supply, Digital: 3.14 V ~ 3.47 V ; Mounting Type: Surf

IDT71682LA12E : 4K X 4 STANDARD SRAM, 12 ns, CDIP24 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 4 k ; Bits per Word: 4 bits ; Package Type: 0.300 INCH, CERDIP-24 ; Pins: 24 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 12 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7024S55GI : 4K X 16 DUAL-PORT SRAM, 55 ns, CPGA84 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 4 k ; Bits per Word: 16 bits ; Package Type: CERAMIC, PGA-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 55 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

79RV3041-16J : 32-BIT, 16.67 MHz, RISC PROCESSOR, PQCC84 Specifications: Architecture: RISC ; Data Bus: 32-Bit ; Supply Voltage: 3.3V ; Package Type: Other, CAVITY DOWN, PLASTIC, LCC-84 ; Pin Count: 84 ; Clock Speed: 33 MHz ; Operating Temperature: 0 to 85 C (32 to 185 F)

 
0-C     D-L     M-R     S-Z