Details, datasheet, quote on part number: IDT54FCT162841ET
PartIDT54FCT162841ET
CategoryLogic => Latches
DescriptionFast CMOS 20-bit Transparent Latches
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162841ET datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Common features: ­ 0.5 MICRON CMOS Technology ­ High-speed, low-power CMOS replacement for ABT functions ­ Typical tSK(o) (Output Skew) 250ps ­ Low input and output leakage 1µ A (max.) ­ ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) ­ Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack ­ Extended commercial range +85°C ­ VCC 5V ±10% Features for FCT16841AT/BT/CT/ET: ­ High drive outputs (-32mA IOH, 64mA IOL) ­ Power off disable outputs permit "live insertion" ­ Typical VOLP (Output Ground Bounce) 1.0V at VCC = 25°C Features for FCT162841AT/BT/CT/ET: ­ Balanced Output Drivers: ±24mA (commercial), ±16mA (military) ­ Reduced system switching noise ­ Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25°C

The FCT16841AT/BT/CT/ET and ET 20-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary storage of data. They can be used for implementing memory address latches, I/O ports, and bus drivers. The Output Enable and Latch Enable controls are organized to operate each device as two 10-bit latches or one 20-bit latch. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT16841AT/BT/CT/ET are ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers. The FCT162841AT/BT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times­reducing the need for external series terminating resistors. The FCT162841AT/BT/CT/ET are plug-in replacements for the FCT16841AT/BT/CT/ET and ABT16841 for on-board interface applications.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Pin Names xDx xLE xOE xQx Description Data Inputs Latch Enable Input (Active HIGH) Output Enable Input (Active LOW) 3-State Outputs

NOTES: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High Impedance 2. Output level before xLE HIGH-to-LOW Transition.

Symbol Description Max. VTERM(2) Terminal Voltage with Respect to +7.0 GND VTERM(3) Terminal Voltage with Respect ­0.5 to GND VCC +0.5 TSTG Storage Temperature +150 I OUT DC Output Current to +120 Unit °C mA

Symbol Parameter(1) CIN Input Capacitance COUT Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. Unit pF 8.0

2556 lnk 04 NOTE: 1. This parameter is measured at characterization but not tested.

2556 lnk 03 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT.


 

Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162841ETE Fast CMOS 20-bit Transparent Latch
IDT54FCT162952 Fast CMOS 16-bit Registered Transceiver
IDT54FCT162952AT
IDT54FCT162952DT
IDT54FCT162952ET
IDT54FCT162H244 Fast CMOS 16-bit Buffer/line Driver
IDT54FCT162H244AT
IDT54FCT162H244ATE
IDT54FCT162H244CT
IDT54FCT162H244CTE
IDT54FCT162H244ET
IDT54FCT162H244ETE
IDT54FCT162H244T
IDT54FCT162H244TE
IDT54FCT162H245 Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245AT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ATE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245CT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245CTE Fast CMOS 16-bit Bidirectional Transceiver

IDT72215LB15J : 512 X 18 Syncfifo, 5.0V

IDT74FCT648DTDB : Fast CMOS Octal Transceiver/ Registers ( 3-state )

IDT71V124S20Y : 3.3V CMOS Static RAM 1 Meg (128k x 8-bit) Center Power & Ground Pinout

IDT71V65602S100PFGI : ZBT (Zero Bus Turnaround) SRAM 3.3V 256K X 36 ZBT Synchronous 2.5V I/o Pipelined SRAM

IDT70P3519S166BCG8 : Memory Integrated Circuit (ics) SRAM - Dual Port, Synchronous Tape & Reel (TR) 1.7 V ~ 1.9 V; IC SRAM 9MBIT 166MHZ 256BGA Specifications: Memory Type: SRAM - Dual Port, Synchronous ; Memory Size: 9M (256K x 36) ; Speed: 166MHz ; Interface: Parallel (Byte-wide) ; Package / Case: 256-LBGA ; Packaging: Tape & Reel (TR) ; Voltage - Supply: 1.7 V ~ 1.9 V ; Operating Temperature: 0°C ~ 70°C ; Format - Memory: RAM ; Lead

ICS83940DYI-01LFT : LOW SKEW CLOCK DRIVER, 18 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, 7 X 7 MM, 1.40 MM HEIGHT, MS-026, LQFP-32 ; Supply Voltage: 2.38 to 2.62 volts ; Skew: 100 ps ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

IDT49FCT805ASOGI8 : FCT SERIES, LOW SKEW CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO20 Specifications: Device Type: Clock Driver ; Bus Interface: CMOS ; Package Type: Surface Mount, QSOP, QSOP-20 ; Supply Voltage: 4.5 to 5.5 volts ; Skew: 350 ps ; Operating Temperature: -40 to 85 C (-40 to 185 F)

IDT72T51433L5BB : 32K X 18 OTHER FIFO, PBGA256 Specifications: Memory Category: FIFO ; Density: 590 kbits ; Number of Words: 32 k ; Bits per Word: 18 bits ; Package Type: BGA, 17 X 17 MM, 1 MM PITCH, PLASTIC, BGA-256 ; Pins: 256 ; Logic Family: CMOS ; Supply Voltage: 2.5V ; Cycle Time: 7.5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74CBTLV3244QG8 : CBTLV/3B SERIES, DUAL 10-BIT DRIVER, TRUE OUTPUT, PDSO48 Specifications: Device Type: Line / Bus Driver ; Supply Voltage: 2.5V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: TVSOP, TVSOP-48 ; Pins: 48 ; Features: RoHS

IDTCSP5V9910-5SO : PLL BASED CLOCK DRIVER, 8 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQCC32 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, PLASTIC, LCC-32 ; Supply Voltage: 3 to 3.6 volts ; Skew: 500 ps ; Frequency: 70 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

Same catergory

5962-8681201EA : Inverting Buffers and Drivers. ti CD54HC368, High Speed CMOS Logic Inverting Hex Buffer/line Driver With 3-State Outputs.

5962-9571201Q3A : D-Type (3-State) Latches. ti SN54ABT843, 9-Bit Bus-interface D-type Latches With 3-State Outputs.

74ACT11020D : ti 74ACT11020, Dual 4-Input Positive-nand Gates. Inputs Are TTL-Voltage Compatible Flow-Through Architecture to Optimize PCB Layout Center-Pin VCC and GND Configurations to Minimize High-Speed Switching Noise EPICt (Enhanced-Performance Implanted CMOS) 1-mm Process 500-mA Typical Latch-Up Immunity at 125°C Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard.

74ACT16541 : CMOS/BiCMOS->AC/ACT Family. 16-bit Buffer/driver With 3-state Outputs.

74ALVC162244 : 3.3V CMOS 16-BIT Buffer/driver With 3-STATE Outputs. 0.5 MICRON CMOS Technology Typical tSK(o) (Output Skew) < 250ps ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) VCC ± 0.3V, Normal Range VCC to 3.6V, Extended Range VCC ± 0.2V CMOS power levels (0.4µ W typ. static) Rail-to-Rail output swing for increased noise margin Available in SSOP, TSSOP, and TVSOP packages This 16-bit.

AZ100EL16 : Bipolar->ECL 100 Family. Differential Receiver. 250ps Propagation Delay High Bandwidth Output Transitions 75k Internal Input Pulldown Resistors Direct Replacement for ON Semiconductor & MC100EL16 PACKAGE AVAILABILITY PACKAGE SOIC 8 SOIC 8 T&R SOIC 8 T&R SOIC 8 SOIC 8 T&R SOIC 8 T&R TSSOP 8 TSSOP 8 T&R TSSOP 8 T&R TSSOP 8 TSSOP 8 T&R TSSOP 8 T&R PART NO. AZ100EL16TR1 AZ100EL16TR2 MARKING AZTEL16 AZHEL16.

CD54HC273 : CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic Octal D-type Flip-flop With Reset.

M74HC4353 : HC/HCT->High Speed CMOS. Triple 2 Channel Analog Multiplexer/demultiplexer With Address Latch.

MC74F365D : F365 Hex Buffer/driver Gated Enable Noninverting, 3-state. F365 HEX BUFFER/DRIVER GATED ENABLE NONINVERTING, 3-STATE F366 HEX BUFFER/DRIVER GATED ENABLE INVERTING, 3-STATE H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High Impedance Symbol VCC TA Supply Voltage Operating Ambient Temperature Range Parameter 54 74 IOH IOL Output Current High 54 74 Output Current Low 54 74 Min ­55 0 Typ 5.0 25 Max mA Unit.

MM74HC126 : CMOS/BiCMOS->HC/HCT Family. 3-STATE Quad Buffers. The MM74HC125 and MM74HC126 are general purpose 3-STATE high speed non-inverting buffers utilizing advanced silicon-gate CMOS technology. They have high drive current outputs which enable high speed operation even when driving large bus capacitances. These circuits possess the low power dissipation of CMOS circuitry, yet have speeds comparable to low power.

MN4066B : Quad Analog Switches.

SN54HCT623 : Bus Oriented Circuits. Octal Bus Transceivers With 3-state Outputs. Inputs Are TTL-Voltage Compatible Lock Bus-Latch Capability True Logic High-Current 3-State Outputs Can Drive to 15 LSTTL Loads Package Options Include Plastic Small-Outline (DW) and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs These octal bus transceivers are designed for asynchronous.

SN74ALS857 : Multiplexers->Bipolar->ALS Family. Hex 2-to-1 Multiplexer. Select True or Complementary Data Perform AND/NAND (Masking) or B Operand Cascadable to Expand Number of Operands Detect Zeros or B Operands 3-State Outputs Interface Directly With System Bus Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (NT) and Ceramic (JT) 300-mil DIPs The ALS857 are hextuple.

TC7SZ08F : LCX Equivalent (TC7SZxx). Function = And ;; Package = SMV.

HEF40174BT-T : 4000/14000/40000 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO16. s: Flip-Flop Type: D ; Triggering: Positive-edge Triggered ; Supply Voltage: 5V ; Output Characteristics: TRUE ; Propagation Delay: 155 ns ; fMAX: 20 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: 3.90 MM, PLASTIC, MS-012, SOT109-1, SOP-16 ; Logic.

 
0-C     D-L     M-R     S-Z