Details, datasheet, quote on part number: IDT54FCT162823ETPVB
PartIDT54FCT162823ETPVB
CategoryLogic => Registers => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS 18-bit Register
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162823ETPVB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85C VCC 5V 10% Balanced Output Drivers: 24mA (commercial) 16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25C

The FCT162823AT/BT/CT/ET 18-bit bus interface registers are built using advanced, dual metal CMOS technology. These high-speed, lowpower registers with clock enable (xCLKEN) and clear (xCLR) controls are ideal for parity bus interfacing in high-performance synchronous systems. The control inputs are organized to operate the device as two 9-bit registers or one 18-bit register. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT162823AT/BT/CT/ET has balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The FCT162823AT/BT/CT/ET are plug-in replacements for the FCT16823AT/BT/CT/ET and ABT16823 for on-board interface applications.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xDx xCLK xCLKEN xCLR xOE xQx Description Data inputs Clock Inputs Clock Enable Inputs (Active LOW) Asynchronous clear Inputs (Active LOW) Output Enable Inputs (Active LOW) 3-State Outputs

xOE xCLR Inputs xCLKEN xCLK X xDx Outputs xQx L Q(2) Function High Z Clear Hold Load

NOTES: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance 2. Output level before indicated steady-state input conditions were established.

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 16mA MIL. IOH = 24mA COM'L. IOL = 16mA MIL. IOL = 24mA COM'L

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55C.


 

Related products with the same datasheet
IDT54FCT162823ETE
IDT54FCT162823ETEB
IDT54FCT162823ETPA
IDT54FCT162823ETPAB
IDT54FCT162823ETPV
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162827 Fast CMOS 20-bit Buffer
IDT54FCT162827AT
IDT54FCT162827ET Fast CMOS 20-bit Buffers
IDT54FCT162827ETE Fast CMOS 20-bit Buffer
IDT54FCT162841 Fast CMOS 20-bit Transparent Latch
IDT54FCT162841AT
IDT54FCT162841ET Fast CMOS 20-bit Transparent Latches
IDT54FCT162841ETE Fast CMOS 20-bit Transparent Latch
IDT54FCT162952 Fast CMOS 16-bit Registered Transceiver
IDT54FCT162952AT

IDT72V253 : 512 X 18 / 1K X 9 Supersync ii Fifo, 3.3V

IDT71V65603S133BQG8 : ZBT (Zero Bus Turnaround) SRAM 3.3V 256K X 36 ZBT Synchronous 3.3V I/o Pipelined SRAM

IDT6116LA45TDB : 2K X 8 STANDARD SRAM, 120 ns, CDIP24 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: DIP, 0.600 INCH, CERAMIC, DIP-24 ; Pins: 24 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

IDT72255LA20PFGI8 : 8K X 18 OTHER FIFO, PQFP64 Specifications: Memory Category: FIFO ; Density: 147 kbits ; Number of Words: 8 k ; Bits per Word: 18 bits ; Package Type: TQFP, 14 X 14 MM, 1.40 MM HEIGHT, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 5V ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74FCT388915T150PYB : FCT SERIES, 10-BIT DRIVER, INVERTED OUTPUT, CQCC28 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: LCC-28 ; Pins: 28 ; Features: RoHS

IDT74FCT841DTLG : FCT SERIES, LOW SKEW CLOCK DRIVER, 5 TRUE OUTPUT(S), 5 INVERTED OUTPUT(S), CDIP20 Specifications: Device Type: Clock Driver ; Bus Interface: CMOS ; Package Type: CERDIP-20 ; Supply Voltage: 4.75 to 5.25 volts ; Skew: 700 ps ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

662M-03LFT : 662 SERIES, PLL BASED CLOCK DRIVER, 1 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO8 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, SOIC, 0.150 INCH, ROHS COMPLIANT, SOIC-8 ; Supply Voltage: 3 to 3.6 volts ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

7025S55JB : 8K X 16 DUAL-PORT SRAM, 55 ns, PQCC84 Specifications: Memory Category: SRAM Chip ; Density: 131 kbits ; Number of Words: 8 k ; Bits per Word: 16 bits ; Package Type: PLASTIC, LCC-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 55 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

70V25S15PFG : IC,SRAM,8KX16,CMOS,PGA,84PIN,CERAMIC Specifications: Memory Category: SRAM Chip

 
0-C     D-L     M-R     S-Z