Details, datasheet, quote on part number: LSG3351-HO
CategoryOptoelectronics => Display => LEDs => LED Lamps
DescriptionSuper-red/green 3mm Multiled
CompanyInfineon Technologies Corporation
DatasheetDownload LSG3351-HO datasheet
Cross ref.Similar parts: MV6461A, XLUGR37M
Find where to buy


Features, Applications

Besondere Merkmale Gehäusetyp: nicht eingefärbtes, diffuses mm (T1) Gehäuse Besonderheit des Bauteils: antiparallel geschaltete Chips; Lötspieße mit Aufsetzebene Wellenlänge: 628 nm (super-rot), 570 nm (grün) Abstrahlwinkel: 50° Technologie: GaAlP optischer Wirkungsgrad: 1,5 lm/W (super-rot), 2,5 lm/W (grün) Gruppierungsparameter: Lichtstärke Lötmethode: Wellenlöten (TTW) Verpackung: Schüttgut, gegurtet lieferbar Anwendungen optischer Indikator Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) Innenbeleuchtung im Automobilbereich (z.B. Tastenhinterleuchtung, u.

Features package: colorless, diffused mm (T1) package feature of the device: anti-parallel chips; solder leads with stand-off wavelength: 628 nm (super-red), 570 nm (green) viewing angle: 50° technology: GaAlP optical efficiency: 1.5 lm/W (super-red), 2.5 lm/W (green) grouping parameter: luminous intensity soldering methods: TTW soldering packing: bulk, available taped on reel Applications optical indicators backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) interior automotive lighting (e.g. key backlighting, etc.)

Typ Type Emissionsfarbe Gehäusefarbe Color of Emission Color of Package Lichtstärke Luminous Intensity mA IV (mcd) Bestellnummer Ordering Code

Streuung der Lichtstärke in einer Verpackungseinheit IV max / IV min 2 1). Streuung der Lichtstärke in einer LED IV max / IV min 3.

Bei MULTILED® bestimmt die Helligkeit des jeweils dunkleren Chips in einem Gehäuse die Helligkeitsgruppe der LED.

Luminous intensity ratio in one packaging unit IV max / IV min 2 1). Luminous intensity ratio in one LED IV max / IV min 3.

In case of MULTILED®, the brightness of the darker chip in one package unit determines the brightness group of the LED.

Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt. Luminous intensity is tested at a current pulse duration 25 ms and a tolerance of ±11

Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe oder mindestens zwei Einzelgruppen. In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse über einen längeren Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozesss) erlaubt keine Zusage einer einzelnen Helligkeitsgruppe. Daher müssen mindestens zwei Helligkeitsgruppen vorgesehen werden! Note: The standard shipping format for serial types includes a lower or upper family group or at least two individual groups. No packing unit / tape ever contains more than one luminous intensity group. Luminosity variations caused by the technology used in current LED manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign LEDs to a single luminous intensity group. For this reason at least two luminous intensity groups must be provided!

Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stoßstrom Surge current t 10 µs, = 0.005 Leistungsaufnahme Power consumption 25 °C Symbol Wert Value Einheit Unit mA A

Wärmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/air Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße mm 2) mounted on PC board FR 4 (pad size mm 2) Minimale Beinchenlänge Minimum lead length


Some Part number from the same manufacture Infineon Technologies Corporation
LSGA671 Multi Sideled (r) Bright Green Die
LSGF971 Chipled
LSGK370 Multi Argus(r) Super-red/green Led 3mm (t1) Led, Non Diffused
LSGK370-LP Super-red/green 3mm Multi Led
LSGK372 Super Multi Argus(r) Super-red/green Led High-current, 3mm (t1), Non Diffused
LSGK372-QO Super-red/green 3mm Multi Led
LSGT670 Multi Topled (r) Opto Semiconductors
LSGT671 Multi Topled (r) Bright Green Die
LSGT672 Super Multi Toplead(r) High-current Led
LSGT677 Multi Topled (r) Cathodes on One Side
LSGT770 Multi Topled (r) RG
LSH380 Super Red Symbol Led 5mm (t1 3 /4) Led , Partly Diffused
LSH380-EH Super Red 5mm Symbol Led
LSK376 Hyper Argus (r) Led Hyper-bright, 3 MM (t1) Led, Non Diffused

SAB83C166W-M : 16-bit Microcontroller (1KByte RAM And 32 Kbyte ROM)

SMBT6427 : NPN Silicon Darlington Transistor

STL51005ZE9259 : 1300 NM Laser in Coaxial Package With SM-pigtail, Low Power

Q67042-S4257 : Cool MOS Power Transistor

HYB39S128800TT-7 : 512-mbit Synchronous DRAM

HYB39S256800TF-5 : 512-mbit Synchronous DRAM

HYB39S512160AT : 512-mbit Synchronous DRAM

IPP80N04S3-06 : Optimos¢ç Power-transistor

BSP170P L6327 : MOSFET SIPMOS Sm-Signal TRANSISTOR Specifications: Manufacturer: Infineon ; Product Category: MOSFET ; RoHS:  Details ; Transistor Polarity: P-Channel ; Drain-Source Breakdown Voltage: 60 V ; Gate-Source Breakdown Voltage: +/- 20 V ; Continuous Drain Current: 1.9 A ; Configuration: Single Dual Drain ; Maximum Operating Temperatu

SPW07N60CFD : Fet - Single Discrete Semiconductor Product 6.6A 650V 83W Through Hole; MOSFET N-CH 650V 6.6A TO-247 Specifications: Mounting Type: Through Hole ; FET Type: MOSFET N-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 650V ; Current - Continuous Drain (Id) @ 25° C: 6.6A ; Rds On (Max) @ Id, Vgs: 700 mOhm @ 4.6A, 10V ; Input Capacitance (Ciss) @ Vds: 790pF @ 25V ; Power - Max: 83W ; Packaging: Tu

TDA16888G GEG : Pmic - Pfc (power Factor Correction) Integrated Circuit (ics) Tape & Reel (TR) 200kHz 0 V ~ 17.5 V; IC PFC CTRLR AVERAGE CURR DSO20 Specifications: Packaging: Tape & Reel (TR) ; Package / Case: 20-SOIC (0.295", 7.50mm Width) ; Voltage - Supply: 0 V ~ 17.5 V ; Mode: Average Current ; Frequency - Switching: 200kHz ; Current - Startup: 50µA ; Operating Temperature: -25°C ~ 85°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS

Same catergory

004-1830-29-203 : 1.35-28 Volts. Uses: T-1 3/4 MIDGET FLANGE BASE INCANDESCENT LAMP Material & Finish: Base - Black Nickel Plated Brass, Cap - Black Nickel Plated Brass with High Impact Plastic Lens 1.35­28 COLOR CLEAR RED GREEN AMBER WHITE RED GREEN FIG COLOR AMBER WHITE CLEAR RED GREEN AMBER WHITE Uses: T-1 3/4 MIDGET FLANGE BASE INCANDESCENT LAMP OR BASED Fig. 8 LED LAMP** GASKET.

ED-S816 : Chip on Glass Display Modules. Digit of Display = 4 ;; External Dimensions LXW (mm) = 93.98 X 45.72 ;; View Area LXW (mm) = 86.36 X 30.48 ;; Character Dimensions H (mm) = 25.4 ;;.

L6408-G : Mr11 And Mr16 Halogen Lamps With Gold Coated Reflectors. High Intensity Infrared Source Several lamps in our MR11 and MR 16 series are now available with gold coated reflectors. This layer of gold provides for increased emission in the infrared. Applications include open field IR gas detection, local infrared heating and remote testing of flame detectors. MR11 and MR16 Halogen Lamps with Gold Coated Reflectors.

MSB75D : 1.9mm X 3.1mm Rectangular Bar Led Lamp.

SML-LXL1209SRC-TR : 1206 Style W/dome / PCB Carrier - Alingap/gaalas.

SRD00214X : Ternary Pin Photodiode With Pigtail. InGaAs/InP - PIN-photodiode Designed for telecommunications applications Sensitive receiver for the 2nd and 3rd optical window (1300 nm and 1500 nm) Suitable for bit rates to 1.2 Gbit/s Low junction and low package capacitance Fast switching times Low dark current Low noise Hermetically sealed 3-pin metal case With optimally coupled multimode-fiber.

SSL-LX3034SUGD : T-3mm Short Lens.

XBUY54D : Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 14.

XDUY07A4 : Material (Color) = GAASp/gap (Yellow);; Lens = ;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 1900;; Iv(ucd) If@10mA Typ.= 2690.

03540508Z : Accessories; FUSE MODULE FLASHER 2PIN. s: Accessory Type: Flasher Module ; For Use With/Related Products: - ; Lead Free Status: Lead Free Compliant by Exemption ; RoHS Status: RoHS Compliant.

LDD-C512RI : 7-Segment Green 18-DIP (0.600", 15.24mm) 2 digit 0.56" (14.22mm) Display Modules - LED Character and Numeric; LED 7-SEG .56 DUAL GRN CC DIRECT. s: Display Type: 7-Segment ; Color: Green ; Package / Case: 18-DIP (0.600", 15.24mm) ; Number of Digits/Alpha: 2 ; Size / Dimension: 0.75" x 0.98" (19mm x 25mm) ; Common Pin: Common Cathode ; Digit/Alpha Size:.

LDD-C5646RI : 7-Segment Red 18-DIP (0.600", 15.24mm) 2 digit 0.56" (14.22mm) Display Modules - LED Character and Numeric; LED DISP 7SEG .56" 660NM SRED CC. s: Display Type: 7-Segment ; Color: Red ; Package / Case: 18-DIP (0.600", 15.24mm) ; Number of Digits/Alpha: 2 ; Size / Dimension: 0.98" L x 0.67" W x 0.32" H (25mm x 17.1mm x 8mm) ; Common Pin: Common Cathode.

SSB-LX2965IGW : LED , Square, 8.89mm 2.1V 25mA Green, 30mA Red Red (x 4), Green (x 4) Through Hole; LED LT BAR SQ RED/GRN DIFF BICLR. s: Color: Red (x 4), Green (x 4) ; Mounting Type: Through Hole ; Configuration: Single ; Voltage Rating: 2.1V ; Current: 25mA Green, 30mA Red ; Lens Style/Size: Square, 8.89mm ; Packaging: Bulk ; Lens Type: Diffused, White ; Lead Free.

597-3209-207F : LED , Round with Flat Top 2.15V 50mA Orange Surface Mount; LED PLCC4 ORG 50MA 7" REEL SMD. s: Color: Orange ; Mounting Type: Surface Mount ; Configuration: Single ; Voltage Rating: 2.15V ; Current: 50mA ; Lens Style/Size: Round with Flat Top ; Packaging: * ; Lens Type: Clear ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

0-C     D-L     M-R     S-Z