Details, datasheet, quote on part number: FAR-M2SC
PartFAR-M2SC
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionPiezo Electric Vco
CompanyFujitsu Microelectronics, Inc.
DatasheetDownload FAR-M2SC datasheet
  

 

Features, Applications

The M2 series (D110) Voltage Controlled Oscillators (VCO) directly oscillate in the frequency range to 30 MHz. The M2 series VCO use a piezoelectric single crystal with high electromechanical coupling coefficient (LiTaO3: lithium tantalate) for stable and wide variable frequency width. Excellent S/N and jitter characteristic due to high Q of lithium tantalate can realize high quality playback sound and picture, especially in PLL circuit of digital audio and video equipments.

Wider variable frequency width than quarts crystals: 0.2% or more High stability (100 times more stable than LC or TTL-IC VCO) Excellent S/N and jitter characteristic due to high Q of lithium tantalate for high quality playback sound and picture. Excellent temperature characteristic: ~ 500 ppm +70C) 10-pin SIP ready for high-density mounting.

(Front view) Terminal No. Terminal Name VIN A-GND VOUT VCC D-GND Description Control voltage input terminal Analog grounding terminal Output terminal Power supply terminal Digital grounding terminal D-GND VCC VOUT A-GND VIN

Note: The GND terminals are not connected inside the module. Be sure to route them on the PC board.

Item Power supply voltage Input control voltage Power consumption Operating temperature Storage temperature Oscillation frequency range Symbol VCC VIN PD Ta Tstg Rated value Unit mW C MHz

Item Power supply voltage Input control voltage Operating temperature Symbol VCC VIN Ta Rated value Unit V C

Frequencies 12.288 MHz 13.500 MHz 14.318 MHz 16.934 MHz Uses Audio Video Audio Part number FAR-M2SC-14M318-D110 FAR-M2SC-16M934-D110 Frequencies 17.734 MHz 22.579 MHz 24.576 MHz 28.636 MHz Uses Video Audio Video Part number FAR-M2SC-24M576-D110 FAR-M2SC-28M636-D110

(VCC 5.0 V) Item Power supply current Oscillation frequency Output voltage H level L level Symbol ICC fH f1 VOH VOL f (VCC) f (Ta) Condition Not loaded VIN 5.0 V VIN 0 V VIN 2.5 V VIN 2.5 V VCC V VIN 2.5 V Rated value minimum +2000 VCC standard 5.0 0 maximum ppm +500 *2 Unit mA ppm V *1

Frequency voltage stability Frequency temperature stability

 

Related products with the same datasheet
FAR-M2SC-12M288-D110
FAR-M2SC-12M288-D111
FAR-M2SC-12M288-D112
FAR-M2SC-12M288-D113
FAR-M2SC-12M288-D114
FAR-M2SC-12M288-D115
FAR-M2SC-12M288-D116
FAR-M2SC-12M288-D117
FAR-M2SC-12M288-D118
FAR-M2SC-12M288-D119
FAR-M2SC-13M500-D110
FAR-M2SC-13M500-D111
Some Part number from the same manufacture Fujitsu Microelectronics, Inc.
FAR-M2SC-12M288-D110 Piezo Electric Vco
FAR-M2SC-12M288-D300
FAR-M2SC-13M500-D110 Piezo Electric Vco
FAR-M2SC-18M432-D300
FAR-M2SC-22M579-D110 Piezo Electric Vco
FAR-M2SC-24M576-D300
FAR-M2SC-28M636-D110 Piezo Electric Vco
FAR-M3DC Piezoelectric Vco ( 6 to 30 MHZ )
FBR12
FBR16
FBR160
FBR161
FBR18

FAR-M2SC-16M934-D114 : Piezo Electric Vco

FBR18N :

MBM29DL323BD80PBT : CMOS 32M (4M X 8/2M X16) Bit Dual Operation

VF-6M :

MBM29LV800TE70PBT : 8M (1M x 8/512 K x 16) BIT

2SK3524 : N-channe Sillcon Power Mosfet

MB85R1002PFTN-GE1 : Memory FRAM CMOS 1 M Bit (64 K 16)

MB9BF312NBGL : RISC MICROCONTROLLER Specifications: Life Cycle Stage: ACTIVE

MB9BF505NABGL : 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PBGA112 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 80 MHz ; ROM Type: Flash ; Supply Voltage: 2.7 to 5.5 volts ; I/O Ports: 80 ; Package Type: Other, 0.80 MM PITCH, PLASTIC, FBGA-112 ; Pin Count: 112 ; Features: DMA

Same catergory

1507 : 10-tap Sip Delay Line. 10 taps of equal delay increment Very narrow device (SIP package) Stackable for PC board economy Low profile Epoxy encapsulated Meets or exceeds MIL-D-23859C The 1507-series device is a fixed, single-input, ten-output, passive delay line. The signal input (IN) is reproduced at the outputs (T1-T10) in equal increments. The delay from to T10 (TD) is given.

AS-2PD : Crystal Oscillators. Frequency Range = 3.200 MHZ to 70.000 MHZ ;; Frequency Stability = ±30 PPM ;; Dimensions Mm/inch = ±50 PPM ;;.

CDC9841 : Clock Circuits. PC Motherboard Clock Synthesizer/driver With 3-state Outputs.

CDCVF2310PW : Non-PLL. ti CDCVF2310, High Performance 1:10 Clock Buffer For General Purpose Applications.

DS1375 : Timekeeping, Timers, and Counters. DS1375 2-Wire Digital Input RTC With Alarm.

ICS9248-128 : CPU/Memory Specific PLL. Frequency Generator & Integrated Buffers. Recommended Application: SIS 530/620 style chipset Output : - 3 CPU to 133.3 MHz. - 6 PCI @ 3.3V (including 1 free-running) - 13 SDRAMs - 3 REF - 1 clock @ 24/14.3 MHz selectable output for SIO - 1 Fixed clock - 1 IOAPIC / 3.3V : to 133MHz frequency support Support power management: CPU, PCI, SDRAM stop and Power down Mode from I2C programming. Spread.

ICS9250-26 : CPU/Memory Specific PLL. Frequency Generator & Integrated Buffers For Celeron & Pii/iii(tm).

MT9041 : Multiple Output Trunk PLL. Provides T1 and E1 clocks, and ST-BUS/GCI framing signals locked to an input reference of either 8 kHz (frame pulse), 1.544 MHz or 2.048 MHz (E1) Meets T TR62411 and ETSI ETS 300 011 s for a 1.544 MHz or 2.048 MHz (E1) input reference Typical unfiltered intrinsic output jitter 0.013 UI peak-to-peak Jitter attenuation @ 10 Hz, 100 Hz and to 40 kHz Low power.

PLL103-07 : Standard Clock Buffer (SDRAM And DDR) , (5x2DDR), 66 - 170MHz in. Generates 12-output buffers from one input. Supports VIA Pro266 DDR chipset. Supports to 2 DDR DIMMS. Supports to 400MHz DDR, SDRAMS. One additional output for feedback. 6 differential clock distribution. Less than 5ns delay. Skew between any outputs is less than 100 ps. 2.5V Supply range. Available in 28-pin SSOP. FBOUT GND DDRC0 VDD2.5 GND DDRC1 VDD2.5.

SMV2278A : Package Style = Sub-l ;; Frequency (MHz) = 2275 to 2280 ;; N@10KHz (dBc/Hz) = -91 ;; Tuning Voltage (Vdc) = 0.30 to 3.00 ;; Tuning Sensitivity (MHz/V) = 147 ;; Power (dBm) = 4.00 ± 2.00 ;; Op.temp ( C) = -40 to 90 ;; VCC (Vdc) = 3.00 ;; Icc (mA) = 13.

SY89311U : 2.5V/3.3V/5V 1:2 Differential Pecl/lvpecl/ecl Fanout Buffer. 2.5V, 3.3V and 5V power supply s Guaranteed AC parameters over temperature: fMAX < 20ps output-to-output skew tr / tf < 300ps propagation delay s 100K compatible I/O s Wide temperature range: +85C s Available in ultra-small 8-pin EPAD MLFTM 2mm) package Precision EdgeTM The is a precision, high-speed 1:2 differential fanout buffer. Having within-device.

VCO190-1950T : High Performance Signal Source. Model: VCO190-1950T Rev: C Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: C) Parameter Frequency Range Tuning Voltage: 1900 MHz 2000 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency.

VCO190-880T : High Performance Signal Source. Model: VCO190-880T Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: C) Parameter Frequency Range Tuning Voltage: 865 MHz 895 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency.

ICS181-01 : Low EMI Single-Output Clock The ICS181-01 generates a low EMI output clock from a clock or crystal input. The device uses ICS proprietary mix of analog and digital Phase-Locked Loop (PLL) technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB. The ICS181-01 offers down spread selection.

3D7622 : 22-Bit Programmable Pulse Generator 22-Bit Programmable Pulse Generator.

 
0-C     D-L     M-R     S-Z