|Description||Available with lead-free finishing 5 Channel ESD Protection Array
The PACDN009 is a diode array designed to provide 5 channels of ESD protection for electronic components or sub-systems. Each channel consists of a pair of diodes which steers an ESD current pulse to either the positive (VP) or negative (VN) supply. The PACDN009 protects against ESD pulses up to ±15kV Human Body Model (100 pF capacitor discharging through a 1.5KΩ resistor), and ±8kV contact discharge, per International Standard IEC 61000-4-2.
|Company||California Micro Devices Corporation|
|Datasheet||Download PACDN009 datasheet
Five channels of ESD protection ±8 kV contact, ±15 kV air ESD protection per channel (IEC 61000-4-2 standard) kV of ESD protection per channel (HBM) Low loading capacitance (3pF typical) Low leakage current is ideal for battery-powered devices Available in miniature 8-lead MSOP package Lead-free version available
The is a diode array designed to provide 5 channels of ESD protection for electronic components or sub-systems. Each channel consists of a pair of diodes which steers an ESD current pulse to either the positive (VP) or negative (VN) supply. The PACDN009 protects against ESD pulses to ±15kV Human Body Model (100 pF capacitor discharging through a 1.5K resistor), and ±8kV contact discharge, per International Standard IEC 61000-4-2. This device is particularly well-suited for portable electronics (e.g., cellular phones, PDAs, notebook computers) because of its small package footprint, high ESD protection level, and low loading capacitance. It is also suitable for protecting video output lines and I/O ports in computers and peripherals and is ideal for a wide range of consumer electronics products. The PACDN009 is supplied an 8-lead MSOP package and is available with optional lead-free finishing.Applications
Consumer electronic products Cellular phones PDAs Notebook computers Desktop PCs Digital cameras and camcorders VGA (video) port protection for desktop and portable PCs© 2004 California Micro Devices Corp. All rights reserved. 09/21/04
PIN NAME CH 1 N.C. CH 5 TYPE I/O GND I/O Supply I/O DESCRIPTION ESD Channel No connect Negative voltage supply rail or ground reference rail ESD Channel ESD Channel ESD Channel Positive voltage supply rail ESD Channel
Standard Finish Leads 8 Package MSOP Ordering Part Number1 PACDN009M Part Marking D009 Lead-free Finish Ordering Part Number1 PACDN009MR Part Marking 009RNote 1: Parts are shipped in Tape & Reel form unless otherwise specified.
© 2004 California Micro Devices Corp. All rights reserved.
PARAMETER Supply Voltage (VP - VN) Diode Forward DC Current (Note 1) Operating Temperature Range Storage Temperature Range DC Voltage at any channel input Package Power Rating MSOP PackagePARAMETER Operating Temperature Range Operating Supply Voltage (VP - VN) RATING to 5.5 UNITS °C V
SYMBOL IP VF VESD PARAMETER Supply Current Diode Forward Voltage ESD Protection Peak Discharge Voltage at any channel input, in system a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 c) Air Discharge per IEC 61000-4-2 Channel Clamp Voltage Positive Transients Negative Transients Channel Leakage Current Channel Input Capacitance @ 1 MHz, VN=0V, VIN=2.5V; Note 2 applies CONDITIONS = 20mA Note 3 Notes 2,4 Note 5 Note 5 @15kV ESD HBM pF 0.65 MIN TYP MAX 10 0.95 UNITS µA V
Note 1: All parameters specified at TA=25°C unless otherwise noted. = 0V unless noted. Note 2: These parameters guaranteed by design and characterization. Note 3: From I/O pins or VN only. VP bypassed to VN with a 0.22µF ceramic capacitor (see Application Information for more details). Note 4: Human Body Model per MIL-STD-883, Method 3015, CDischarge = 100pF, RDischarge 5.0V, VN grounded. Note 5: Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge 5.0V, VN grounded.
|Related products with the same datasheet|
|Some Part number from the same manufacture California Micro Devices Corporation|
|PACDN009M Available with lead-free finishing 5 Channel ESD Protection ArrayThe PACDN009 is a diode array designed to provide 5 channels of ESD protection for electronic components or sub-systems. Each channel|
|PACDN042 PActive™ Transient Voltage Suppressor ArraysThe PACDN042/43/44/45/46 family of transient voltage suppressor arrays provide a very high level of protection for sensitive electronic components which may be subjected|
|CM1400-03 The CM1400-03 is a six channel low-pass filter array that reduces EMI/RFI emissions while at the same time providing ESD protection. It is used on data ports on mobile devices. To reduce EMI/RFI emissions,|
|CM1401-03 The CM1401-03 is a multichannel array with four low-pass filter with ESD channels and four ESD-only channels. They reduce EMI/RFI emissions on a data port and protect against ESD on a USB port. Each EMI/RFI|
|CM1402 CAMD's CM1402 is an EMI filter array with ESD protection, which integrates three pi filters (C-R-C) and two additional channels of ESD protection. The CM1402 has component values of 20pF-47Ω-20pF,|
|CM1405 8 Channel LCD EMI Filter Array with ESD protection and Optiguard™ CoatingCalifornia Micro Device's CM1405 is an EMI filter array with ESD protection, which integrates eight Pi- filters (C-R-C). The CM1405|
|CM1406 California Micro Devices's CM1406 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). Each CM1406 filter has component values of 15pF-200Ω-15pF. These|
|CM1407 California Micro Devices's CM1407 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). The CM1407 has component values of 7.5pF-200Ω-7.5pF. The parts|
|CM1410 The CM1410 is a quad low-pass filter array integrating four pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This device is custom-designed to interface|
|CM1411 The CM1411 is a dual low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This part is custom-designed to interface|
|CM1412 The CM1412 is a dual low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This part is custom-designed to interface|
|CM1414 The CM1414 is a low-pass filter array designed specifically to reduce EMI/RFI emissions and provide ESD protection for a headset port on cellular and mobile devices. The CM1414 integrates two high quality,|
|CM1415 The CM1415 is a low-pass filter array integrating three pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This device is custom-designed to interface|
|CM1418 California Micro Devices’ CM1418 is an L-C EMI filter array with ESD protection, which integrates two Pi-filters (C-L-C) for the headset speaker. The CM1418 has component values of 117pF-3.0nH-117pF. The parts|
|CM1420 CAMD's CM1420 and CM1422 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CM1420/22 has component values of 15pF-100OHM-15pF. These devices|
|CM1421 The CM1421 is a multichannel array consisting of four low-pass filters with integrated ESD protection and four ESD-only protection channels designed to reduce EMI/RFI emissions on LCD data lines in mobile|
|CM1423 California Micro Devices's CM1423 is an EMI filter array with ESD protection, which integrates six Pi- filters (C-R-C) and four channels of ESD protection. The CM1423’s filters have component values of 12pF-100Ω-12pF.|
|CM1424 The CM1424 is an EMI filter array integrating 3 pi-filters (C-R-C) and 2 channels of ESD protection. The CM1424 has component values of 12pF-100Ω-12pF. The parts include avalanche-type ESD diodes|
|CM1425 CAMD's CM1425 is an EMI filter array with ESD protection, which integrates 4 pi filters (C-R-C). The CM1425 has component values of 20pF-100Ω-20pF. The parts include ESD protection diodes on every|
|CM1426 The CM1426 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in a Chip Scale Package with 0.50mm pad pitch. The CM1426 has component values|
CM3014-25ST : Low Noise, Micropower 150mA LDO Regulator, Package : SOT23-5
G65SC151PI-2 : Adv-cmos Communications Terminal Unit
PACDN042Y3 : Transient Voltage Suppressor Array
PRC211330/251M : Emi/rfi Tapped Filter
PRN111246800J : Bussed Resistor Network
CM3004-25SA : 1.0 Amp Dual Mode Low-Dropout CMOS Regulator The CM3004 is a very-low-dropout regulator that offers both fixed output and fixed/adjustable operating modes. When the Adjust control pin (ADJ) is grounded, this device automatically enters a fixed voltage mode delivering 2.5V out at 1.0A. When the Adju
CM3019-33MA : Micropower, 500ma Low Noise CMOS LDO Regulator
PACDN044Y5R : Transient Voltage Suppressors / ESD Protectors
XRN740-1005JW : Stable Extended Capability Chip Series
9054RDK-860 : Reference Design Kit With Pci SDLK. s PICMG v2.0 R2.1 CompactPCI compliant, full Hot Swap adapter board based on the powerful PLX PCI 9054 Bus Master I/O Accelerator Hot Swap Friendly chip with direct connect to Motorola MPC860 PowerQUICC Based on the powerful combination of the PLX PCI 9054 Bus Master I/O Accelerator Chip and the Motorola® MPC860 PowerQUICCTM microprocessor, the PLX CompactPCI.
ADC5030 : Boards->Others. Wide Dynamic Range, High-Speed, 18-Bit Sampling A/D Converters The ADC5020/ADC5030 18-bit A/D converter, designed with a unique sub-ranging architecture, achieves excellent speed, accuracy, and linearity. For digitizing fast time-varying signals, the ADC5020 has a built-in sample-and-hold amplifier. For applications with multiplexed DC signals or an external.
CD4015BDMSR : Space Applications. Radiation Hardened CMOS Dual 4-Stage Static Shift Register With Serial Input/parallel Output.
CD4585BDMSR : Space Applications. Radiation Hardened CMOS 4-Bit Magnitude Comparator.
HCTS04DMSR : Space Applications. Radiation Hardened Hex Inverter. 14 LEAD CERAMIC DUAL-IN-LINE METAL SEAL PACKAGE (SBDIP) MIL-STD-1835 CDIP2-T14 TOP VIEW 3 Micron Radiation Hardened SOS CMOS Total Dose 200K RAD (Si) SEP Effective LET No Upsets: >100 MEV-cm2/mg Single Event Upset (SEU) Immunity x 10-9 Errors/Bit-Day (Typ) Dose Rate Survivability: x 1012 RAD (Si)/s Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse Latch-Up.
IRMDAC3 : Ir2233 Reference Design Kit: 3-phase 460vac 3hp Motor Drive. The IRMDAC3 Reference Design is a kit of parts that work together as an evaluation platform for IR2233 three phase motor control IC and IRPT2062A power module. User connects three phase AC, drive signals, motor and hall sensors to complete the system. Power hook-up is via terminal blocks and control signals are made using a single in line header. How the IR2233.
MAX152EVKIT : Evaluation Kit For Max152. The MAX152 evaluation kit (EV kit) is fully assembled, and provides a proven design and PC board layout for fast, easy evaluation of the MAX152 at sample rates 400ksps. An oscillator continuously triggers the converter, and an LED displays the conversion results. Several jumpers allow the board to be configured for the various operating modes of the MAX152,.
MAX1612EVKIT : Evaluation Kit. The MAX1612 evaluation kit (EV kit) is a complete bridge-battery management circuit. A small 2.4V, 50mAh NiCd battery, similar to the type commonly used in bridge circuits of notebook computers, is mounted on the board. When the main power source is disconnected, the MAX1612 boosts the 2-cell bridge battery voltage 6V to power the load. The MAX1612.
MAX310MJE/883B : Military/Aerospace->Military Standard. CMOS Rf/video Analog Mux. SCOPE: CMOS RF/VIDEO ANALOG MULTIPLEXER Device Type 01 02 Generic Number MAX310(x)/883B MAX311(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter Maxim SMD CDIP2-T16 CQCC1-N20 Case Outline Package Code J16 L20 Absolute Maximum Ratings Voltage Referenced to VV+. +36V V- +24V Digital Inputs.
MAX738AMJA/883B : Military/Aerospace->Military Standard. 5v, Step-down, Current-mode PWM DC-DC Converter.
MB86831EVKT : Mb86831 Evaluation Kit. Fujitsu introduces a full-featured, low-cost evaluation kit for the SPARCliteTM RISC processor. The kit includes a board module and software to allow users to evaluate SPARClite's performance. The GNU-C cross compiler included in the kit is DOS hosted. It is optimized for SPARClite and can produce executable code for the entire SPARClite family of products.
MH1 : Military/Aerospace. 1.6M Used Gates 0.35 µm CMOS Sea of Gates / Embedded Arrays.
MX7528TQ/883B : Military/Aerospace->Military Standard. CMOS Buffered, Multiplying 8-bit D/A Converter.
NCP5331FTR2 : PWM Controller, Package: Lqfp, Pins=32. NCP5331 Two-Phase PWM Controller with Integrated Gate Drivers The is a second-generation, two-phase, buck controller that incorporates advanced control functions to power 64-bit AMD Athlont processors and low voltage, high current power supplies. Proprietary multiphase architecture guarantees balanced load-current sharing, reduces output voltage and input.
SIM-162CAH : LDM->IN DOOR USED LDM. LDM , in Door Used LDM.
TMC2069P7C : Demonstration Board For The Tmc3003 DAC. Parallel TTL Compatible Inputs Component and VGA Outputs Fairchild demo board compatibility The TMC2069P7C DAC demonstration board provides a flexible base for evaluating the performance of the TMC3003 triple 10 bit DAC. The board can output analog component video or VGA. There are high quality Hybrid filters (601-003) on the output. Applications Evaluation.
VN820 : VIPower (Vertical Intelligent Power). High Side Driver. CMOS COMPATIBLE INPUT ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT The VN820SO, VN820PT are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load.
CM1204 : The CM1204 is a quad ESD transient voltage supression diode array. Each diode provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). These diodes safely dissipate ESD strikes of ±15kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883.
FAN7710 : Electronic Ballast Control IC The FAN7710, developed using Fairchild’s unique high-voltage process and system-in-package (SiP) concept, is a ballast control integrated circuit (IC) for a compact fluorescent lamp (CFL). The FAN7710 controls internal high-voltage stress and delivers 20W to the lamp at 310VDC voltage. FAN7710 incorporates a preheating.