Details, datasheet, quote on part number: ADG441
CategoryAnalog & Mixed-Signal Processing => Switches & Multiplexers => Analog Switches
DescriptionQuad SPST (4NC) Switch (DG441 Replacement)
CompanyAnalog Devices
DatasheetDownload ADG441 datasheet
Cross ref.Similar parts: DG441
Find where to buy


Features, Applications

FEATURES 44 V Supply Maximum Ratings VSS to VDD Analog Signal Range Low On Resistance 70 ) Low RON (9 max) Low RON Match (3 max) Low Power Dissipation Fast Switching Times tON 110 ns tOFF 60 ns Low Leakage Currents 3 nA max) Low Charge Injection (6 pC max) Break-Before-Make Switching Action Latch-Up Proof Plug-In Upgrade for DG202A/ADG202A, DG211/ADG211A Plug in Replacement for DG441/DG442/DG444 APPLICATIONS Audio and Video Switching Automatic Test Equipment Precision Data Acquisition Battery Powered Systems Sample Hold Systems Communication Systems GENERAL DESCRIPTION

Each switch conducts equally well in both directions when ON and has an input signal range that extends to the power supplies. In the OFF condition, signal levels up to the supplies are blocked. All switches exhibit break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

The ADG441, ADG442 and ADG444 are monolithic CMOS devices comprising four independently selectable switches. They are designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. The on resistance profile is very flat over the full analog input range ensuring good linearity and low distortion when switching audio signals. High switching speed also makes the parts suitable for video signal switching. CMOS construction ensures ultralow power dissipation making the parts ideally suited for portable and battery powered instruments. The ADG441, ADG442 and ADG444 contain four independent SPST switches. Each switch of the ADG441 and ADG444 turns on when a logic low is applied to the appropriate control input. The ADG442 switches are turned on with a logic high on the appropriate control input. The ADG441 and ADG444 switches differ in that the ADG444 requires 5 V logic power supply which is applied to the VL pin. The ADG441 and ADG442 do not have a VL pin, the logic power supply being generated internally by an on-chip voltage generator.

1. Extended Signal Range The ADG441/ADG442/ADG444 are fabricated on an enhanced LC2MOS, trench-isolated process, giving an increased signal range that extends to the supply rails. 2. Low Power Dissipation 3. Low RON 4. Trench Isolation Guards Against Latch Up A dielectric trench separates the P and N channel transistors thereby preventing latch up even under severe overvoltage conditions. 5. Break-Before-Make Switching This prevents channel shorting when the switches are configured as a multiplexer. 6. Single Supply Operation For applications where the analog signal is unipolar, the ADG441/ADG442/ADG444 can be operated from a single rail power supply. The parts are fully specified with a single +12 V power supply.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703

Parameter ANALOG SWITCH Analog Signal Range RON Match LEAKAGE CURRENTS Source OFF Leakage IS (OFF) Drain OFF Leakage ID (OFF) Channel ON Leakage ID, IS (ON) DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current IINL or IINH DYNAMIC CHARACTERISTICS2 tON tOFF tOPEN Charge Injection OFF Isolation Channel-to-Channel Crosstalk CS (OFF) CD (OFF) CD, CS (ON) POWER REQUIREMENTS IDD ADG441/ADG442 ADG444 ISS IL (ADG444 Only)

­10 mA VDD +13.5 V, VSS ­10 mA VDD +16.5 V, VSS 15.5 V; Test Circuit 15.5 V; Test Circuit 15.5 V; Test Circuit 3

= 35 pF; 10 V; Test Circuit = 35 pF; 10 V; Test Circuit = 35 pF; 0 , CL= 1 nF; VDD +15 V, VSS ­15 V; Test Circuit = 5 pF; = 1 MHz; Test Circuit = 5 pF; = 1 MHz; Test Circuit MHz = 1 MHz = 1 MHz VDD +16.5 V, VSS ­16.5 V Digital Inputs 5 V

NOTES 1 Temperature ranges are as follows: B Versions: +85°C; T Versions: +125°C. 2 Guaranteed by design, not subject to production test. Specifications subject to change without notice.

Parameter ANALOG SWITCH Analog Signal Range RON Match LEAKAGE CURRENT Source OFF Leakage IS (OFF) Drain OFF Leakage ID (OFF) Channel ON Leakage ID, IS (ON) DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current IINL or IINH DYNAMIC CHARACTERISTICS2 tON tOFF tOPEN Charge Injection OFF Isolation Channel-to-Channel Crosstalk CS (OFF) CD (OFF) CD, CS (ON) POWER REQUIREMENTS IDD IL (ADG444 Only)

= ­10 mA; VDD ­10 mA VDD V/12.2 V; Test Circuit V/12.2 V; Test Circuit V/1 V; Test Circuit 3

= 35 pF; +8 V; Test Circuit = 35 pF; +8 V; Test Circuit = 35 pF; = 1 nF; VDD +12 V, VSS 0 V; Test Circuit = 5 pF, = 1 MHz; Test Circuit = 5 pF, = 1 MHz; Test Circuit MHz = 1 MHz = 1 MHz VDD +13.2 V Digital Inputs 5 V

NOTES 1 Temperature ranges are as follows: B Versions: +85°C; T Versions: to +125 °C. 2 Guaranteed by design, not subject to production test. Specifications subject to change without notice.

To order MIL-STD-883, Class B processed parts, add to T grade part numbers. N = Plastic DIP, = 0.15" Small Outline IC (SOIC), Q = Cerdip.


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
ADG441B Quad SPST (4NC) Switch (DG441 Replacement)
ADG451 5 Ohm, Quad SPST (4NC) Switch
ADG465 Single Channel Protector in an SOT-23 Package
ADG466 Triple Channel Protector (Fault And Overvoltage Protection)
ADG506A 16-Channel Multiplexer (Superior DG506A Replacement)
ADG506AKN CMOS 8-/16-channel Analog Multiplexers
ADG506AKP 16-Channel Multiplexer (Superior DG506A Replacement)
ADG506AKR CMOS 8-/16-channel Analog Multiplexers
ADG506AT 16-Channel Multiplexer (Superior DG506A Replacement)
ADG507A 16-Channel Multiplexer (Superior DG506A Replacement)
ADG507AKN CMOS 8-/16-channel Analog Multiplexers
ADG507AKP 16-Channel Multiplexer (Superior DG506A Replacement)
ADG508A -
ADG508ABQ CMOS 4/8 Chaannel Analog Multiplexers
ADG508AK -
ADG508AKP CMOS 4/8 Chaannel Analog Multiplexers
ADG508ATE CMOS 4/8 Chaannel Analog Multiplexers
ADG508F 4/8 Channel Fault-protected Analog Multiplexers

AD7944 : 2-Channel, 2.35 V to 5.25 V, 250 Ksps, 10-Bit A/D Converter

ADUC845BCP32-3 : Microconverter , 1-Cycle 8052 MCU + 10-Channel, Dual 24-Bit ADC + 12-Bit DAC + 62 K-byte Flash in 8 MM X 8 MM Chip-scale-package (CSP)

SSM2304CPZ-REEL7 : The SSM2304 is a fully integrated, high efficiency, Class-D stereo audio amplifier. It is designed to maximize performance for portable applications. The application circuit requires a mini-mum of external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 2 W o

ADIS16362/PCBZ : Ix Degrees Of Freedom Inertial Sensor The ADIS16362 iSensor® is a complete inertial system that includes a triaxis gyroscope and triaxis accelerometer. Each sensor in the ADIS16362 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory c

ADXL330KCPZ1 : Small, Low Power, 3-axis ”¾3 g i Mems¢ē Accelerometer

AME8501AEFTBD19 : Uprocessor Supervisory

ADM6316BX46ARJZ-R7 : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Cut Tape (CT) 1; IC SUPERVISOR WATCHDOG SOT23-5 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: SC-74A, SOT-753 ; Packaging: Cut Tape (CT) ; Number of Voltages Monitored: 1 ; Reset Timeout: 20 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 4.63V ; Operating Temperature: -40°C ~ 85°C ; Lea

AD5685RBCPZ-RL7 : IC DAC 14BIT SPI QUAD 16LFCSP Analog Devices, Inc. introduces a second series of quad 16- and 12-bit 3 V/5 V D/A converters in space-saving 16-lead LFCSP and TSSOP packages. These new AD5686/96 nanoDAC+™ quad D/A converters offer the industry’s best DC performance (INL is ±2LSB max, offset error is ±

Same catergory

AD9631 : Ultralow Distortion, High Speed op Amp, Stable at Gain of 1. Ultralow Distortion, Wide Bandwidth Voltage Feedback Op Amps AD9631/AD9632 FUNCTIONAL BLOCK DIAGRAM 8-Pin Plastic Mini-DIP (N), Cerdip (Q), and SO (R) Packages Wide Bandwidth = +2 Small Signal 320 MHz 250 MHz Large Signal (4 V p-p) 175 MHz 180 MHz Ultralow Distortion (SFDR), Low Noise ­113 dBc typ @ 1 MHz ­95 dBc typ @ 5 MHz ­72 dBc typ @ 20 MHz +46 dBm 3rd Order.

DG202 : Quad, Spst, Normally Open, CMOS Analog Switch.

GS1508 : Hd-linx(tm) HDTV Cable Driver. DATA SHEET SMPTE 292M compliant dual cable driving outputs optimized for driving data 1.485Gb/s ±7% tolerance output >17dB output return loss minimum external components seamless interface with the HD-LINXTM family of products low power standard packaging APPLICATIONS 1.485Gb/s HDTV Serial Digital Receiver Interfaces for: Routers, Distribution Amplifiers,.

HFA1106 : 315mhz, Low Power, Video op Amp With Compensation Pin. T DUC ENT PRO LACEM r at REP 05 OLE ente OBS ENDED, HFA11pport C m/tsc 2 OMMFA110 nical Su H h REC c e ww.i 8-INTE 1-88 315MHz, Low Power, Video Operational Amplifier with Compensation Pin The is a high speed, low power current feedback operational amplifier built with Intersil's proprietary complementary bipolar UHF-1 process. This amplifier.

LA7950 : TV Field Frequency Discriminator. The an IC designed to discriminate the field frequency based on the relation between TV vertical signal and horizontal signal. It is suited for use in automatically setting various types of video equipment, such as color TV, to PAL/NTSC mode. Sync separation. Field frequency counter. Vertical sync separation. Forced (manual) output select. Small-sized.

LT1097N8 : . LT®1097 achieves a new standard in combining low price and outstanding precision performance. On all operational amplifier data sheets, the s listed on the front page are for highly selected, expensive grades, while the specs for the low cost grades are buried deep in the data sheet. The LT1097 does not have any selected grades, the outstanding s shown.

LTC1068C : Clock-tunable, Quad Second Order, Filter Building Blocks. LTC1068 Series Clock-Tunable, Quad Second Order, Filter Building Blocks Four Identical 2nd Order Filter Sections in an SSOP Package 2nd Order Section Center Frequency Error: ±0.3% Typical and ±0.8% Maximum Low Noise per 2nd Order Section, LTC1068-25 90µVRMS Low Power Supply Current: 4.5mA, Single 5V, LTC1068-50 Operation with ± 5V Power Supply, Single.

MAX4238 : MAX4238, MAX4239 Ultra-low Offset/Drift, Low-Noise, Precision SOT23 Amplifiers.

MAX4265 : Ultra-Low-Distortion, Single-Supply, 300MHz op Amps With Enable. The MAX4265­MAX4270 ultra-low distortion, voltage-feedback op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) performance: at 5MHz and 100MHz (MAX4269). Additionally, input voltage noise density is 8nV/Hz while operating from a single to +8.0V.

MIC863 : MIC863 Dual Ultra Low Power op Amp in SOT23-8. The is a dual low power operational amplifier in SOT23-8 package. It is designed to operate in the to 5V range, rail-to-rail output, with input common-mode to ground. The MIC863 provides 450kHz gain-bandwidth product while consuming only a 4.2µA supply current. With low supply voltage and SOT23-8 packaging, MIC863 provides two channels as general-purpose.

RL801S : Glass Passivated Silicon Rectifier ( Voltage Range 50 to 800 Volts Current 8.0 Amperes ).

TLC25L4 : . A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise. 25 nV/Hz Typ = 1 kHz (High-Bias Version) symbol (each amplifier) The IN + and TL25M4B are low-cost, low-power quad OUT operational amplifiers designed to operate.

TLC7701 : Power. Micropower Supply Voltage Supervisors. Power-On Reset Generator Automatic Reset Generation After Voltage Drop Precision Voltage Sensor Temperature-Compensated Voltage Reference Programmable Delay Time by External Capacitor Supply Voltage Range. 6 V Defined RESET Output from VDD 1 V Power-Down Control Support for Static RAM With Battery Backup Maximum Supply Current 16 µA Power Saving Totem-Pole.

UC2904 : Power. Precision Quad Supply And Line Monitor. Inputs for Monitoring Up to Four Supply Voltages Two Inputs Preset for -5V and -12V Monitoring, or Programmable Positive Levels Precision 2.5V Reference Separate Inputs for Over-Current and Line Fault Sensing Adjustable Under- to Over-Voltage Fault Windows Latched Over-Voltage and Over-Current Output Power Good and Power Warning Outputs Auto Restart.

ISL28470 : Quad Channel Micro-power, Single Supply, Rail-to-Rail Input and Output (RRIO) Instrumentation Amplifier The ISL28270 and ISL28273 are dual channel micropower instrumentation amplifiers (in-amps) and the ISL28470 is a quad channel in-amp optimized for low 2.4V to 5V single supplies..

0-C     D-L     M-R     S-Z