Details, datasheet, quote on part number: MGS-71008
PartMGS-71008
Category
DescriptionAbsorptive SPDT GaAs MMIC Switch
CompanyAgilent Technologies, Inc.
DatasheetDownload MGS-71008 datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Absorptive SPDT GaAs MMIC Switch Technical Data
Features

Single-Pole, Double-Throw Output Broad Bandwidth: to 3 GHz High Isolation: 37 dB Typical at 1 GHz Fast Switching Time: 3 ns Typical Ultra Low DC Power Consumption Small Surface-Mount Plastic Package

surface-mount SO-8 package. Switching is actuated -5 V control voltage per the truth table shown on the next page. -3.3 V operation is also possible with some reduction P1 dB and IP3. The MGS-71008 is designed for high volume commercial applications where low insertion loss, high isolation, and fast switching speed are required. Its low cost and high performance make it suitable for a wide variety of uses such as digital cellular, spread spectrum, GPS, and other RF switching applications. Refer to applications note AN-G007 for more application details. The die is fabricated using HP's nominal 0.3 micron recessed Schottky-barrier-gate, gold metallization, and silicon nitride passivation to achieve excellent performance, uniformity, and reliability.

Description

The is a single-pole, double-throw monolithic GaAs MMIC switch. The J2 and J3 of the MGS-71008 are terminated to ground by internal 50 load resistors when "off" (a reflective version, the MGS-70008, which terminates the "off" port to ground, is also available). The switch is sealed in a small, plastic,

Symbol Parameter Maximum Input Power below 500 MHz above 500 MHz Control Voltage Storage Temperature Units dBm V C Absolute to 150

Note: 1. Operation of this device above any one of these limits may cause permanent damage.

Symbol BW IL Parameters and Test Conditions[1] Control Input Current Bandwidth Insertion Loss 200 MHz 1000 MHz 2000 MHz 2500 MHz 3000 MHz 200 MHz 1000 MHz 2000 MHz 2500 MHz 3000 MHz DC -1000 MHz 1000-3000 MHz DC -2000 MHz 2000-3000 MHz 90% 200 MHz 1000 MHz 2000 MHz 200 MHz 1000 MHz 2000 MHz DC Units A GHz dB ns dBm 30 DC-3 Min. Typ. Max. 12 110

Voltage Standing Wave Ration (on port) Voltage Standing Wave Ration (off port) Switching Speed Output 1 dB Gain Compression

Notes: 1. Measured a 50 system at 1 GHz, unless otherwise specified, V. 2. Measured a 50 system with -7 V.


Control Input -5 V Insertion Loss 26 dB Return Loss 1 dB

MGS-71008 Typical Power Performance vs. Frequency and Control Voltage (VC) (All other typical specifications remain constant.)


 

Some Part number from the same manufacture Agilent Technologies, Inc.
HP8483A Power Sensor
MGS-70008 Reflective SPDT GaAs MMIC Switch
54600 54600-series Oscilloscopes
N8974A NFA Series Noise Figure Analyzers
HSMX-H670 Surface Mount Flip Chip LEDs
HSMS2850 Surface Mount Zero Bias Schottky Detector Diodes
HCPL0710 40 ns Prop. Delay, SO-8 Optocoupler
HLMP-D101-J0000 T-1 - 3/4 (5 mm) Precision Optical Performance Alingap LED Lamps

HLMP-RL11-LPR00 : 4 MM Oval Precision Optical Performance Led Lamps

AEDL0470 : AEDL Series Optical Linear Incremental Encoder The AEDL Series linear encoders use high technology transmissive optical encoding technique to detect linear motion. There is no mechanical contact between the scanning head and the linear scale, thus eliminating error due to frictions and alig

HEDS-5505-G12 : Panel Mount Optical Encoders

HDSP-5723-HJ000 : 14.2 mm (0.56 Inch) Seven Segment Displays

AMMP-6220-TR1 : 5-30 GHz Image Reject Mixer

HDSP-315L-KM000 : 7.6mm (0.3 Inch)/10.9mm (0.43 Inch) Seven Segment Display

5082-5521-JK000 : 14.2 mm (0.56 Inch) Seven Segment Displays

HCPL-530K-100 : Ac/dc to Logic Interface Hermetically Sealed Optocouplers

HLMP-6400-F0000 : Subminiature LED Lamps

HLMP-1320-JX000 : T-13/4 (5 mm), T-1 (3 mm), Low Current LED Lamps

HLMP-1421-OP000 : T-13/4 (5 mm), T-1 (3 mm), Low Current LED Lamps

Same catergory

MC3450 : Quad Differential Line Receivers. Four Independent Receivers With Common Enable Input High Input Sensitivity. 25 mV Max High Input Impedance MC3450 and MC3550 Have 3-State Outputs MC3452 Has Open-Collector Outputs Glitch-Free Power-Up/Power-Down Operation The MC3550, MC3452, and MC3552 are quad differential line receivers designed for use in balanced and unbalanced digital data transmission.

OP250 : Quad. Dual CMOS Single-supply Rail-to-rail Input/output Operational Amplifier.

KB26NKG01 : Miniature Pushbuttons. Square, rectangular, and round shaped caps. Latchdown feature gives indication of circuit status. Audible and tactile feedback with smooth and responsive operation. Snap-action mechanism for long life. Stainless steel frame on snap-in models has a specially designed projection, which prevents rotation and correctly orients switch in panel. 12mm body.

D22B020AA : Line Feed Resistors W/resettable Polymer PTC & Overvoltage Protectors.

UVZ2V470MHH : 47F Aluminum Capacitor Radial, Can 350V; CAP ALUM 47UF 350V 20% RADIAL. s: Capacitance: 47F ; ESR (Equivalent Series Resistance): - ; : General Purpose ; Lifetime @ Temp.: 1000 Hrs @ 105C ; Size / Dimension: 0.630" Dia (16.00mm) ; Lead Spacing: 0.295" (7.50mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Can ; Packaging:.

EZM22DRAS : Gold Through Hole, Right Angle Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGE DUAL .156 R/A 44POS. s: Card Thickness: 0.062" (1.57mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Gold ; Mounting Type: Through Hole, Right Angle ; : - ; Number of Positions: 44 ; Number of Rows: 2 ; Pitch: 0.156".

67117-025 : Gold Through Hole, Right Angle Rectangular - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle; HORZ CARD CON-N 30AU. s: Color: Black ; Connector Type: Receptacle ; Contact Finish: Gold ; : - ; Mounting Type: Through Hole, Right Angle ; Number of Positions Loaded: All ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Row Spacing:.

LB2012T6R8M : Fixed Inductors, Coils, Choke 6.8H 135mA 0805 (2012 Metric) -; INDUCTOR WOUND 6.8UH 135MA 0805. s: Inductance: 6.8H ; Tolerance: 20% ; Package / Case: 0805 (2012 Metric) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 135mA ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: 38MHz ; DC Resistance (DCR): 611 mOhm Max ; Shielding:.

WLNG-EK-DP501 : Rf Evaluation And Development Kits, Board Rf/if And Rfid; KIT EVAL FOR 802.11G MODULES. s: Type: Bridge, 802.11b/g ; Supplied Contents: Board, 2 Antennas, Power Supply ; For Use With/Related Products: Enterprise class device server modules ; Frequency: 2.4GHz ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

MCR10EZHF2701 : 2.7K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 2.70K OHM 1/8W 1% 0805 SMD. s: Resistance (Ohms): 2.7K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CSC10A011K20GEK : Resistor 1.2K Ohm 200mW 9 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 1.2K OHM 9 RES 10-SIP. s: Resistance (Ohms): 1.2K ; Tolerance: 2% ; Power Per Element: 200mW ; Circuit Type: Bussed ; Number of Pins: 10 ; Packaging: Bulk ; Number of Resistors: 9 ; Package / Case: 10-SIP ; Mounting Type: Through Hole ; Temperature Coefficient: 100ppm/C.

4610M-802-500/103 : Resistor 50, 10K Ohm 300mW 16 Resistors[number of pins] Pin Networks, Arrays; RES NET MULT OHM 16 RES 10-SIP. s: Resistance (Ohms): 50, 10K ; Tolerance: 2 Ohm, 2% ; Power Per Element: 300mW ; Circuit Type: Dual Terminator ; Number of Pins: 10 ; Packaging: Bulk ; Number of Resistors: 16 ; Package / Case: 10-SIP ; Mounting Type: Through Hole ; Temperature.

DAV7W2S300H30LF : Gold Through Hole D-sub Connectors, Interconnect Receptacle, Female Sockets; DSUB POWER STB 7W2 SOCK. s: Connector Type: Receptacle, Female Sockets ; Contact Finish: Gold ; : Board Lock ; Flange Feature: Mating Side; Female Screwlock (4-40) ; Mounting Type: Through Hole ; Number of Positions: 7 ; Number of Rows: 2 ; Termination: Solder ; Contact Finish.

MSD3H4C : 7 SEG NUMERIC DISPLAY, RED, 7.6 mm. s: Display Type: Segmented ; Character Type: Numeric ; Common: Common Anode ; LED Color: Red ; Character Height: 7.6 mm (0.2992 inch) ; Operating Temperature: -40 to 185 F (233 to 358 K).

NV06I00101G : RESISTOR, TEMPERATURE DEPENDENT, NTC, 100 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Mounting / Packaging: ThroughHole, Radial Leads, RADIAL LEADED ; Resistance Range: 100 ohms ; Tolerance: 2 +/- % ; Power Rating: 0.6900 watts (9.25E-4 HP) ; Operating Temperature: -55 to 150 C (-67 to 302 F).

 
0-C     D-L     M-R     S-Z