Details, datasheet, quote on part number: ABMM3
CategoryTiming Circuits => Oscillators => Crystal/Quartz Oscillators => Crystal Oscillators
TitleCrystal Oscillators
Description6.0 X 3.5 X 1.3 MM Ceramic Glass Sealed 13MHz to 120MHz
CompanyAbracon Corporation
DatasheetDownload ABMM3 datasheet


Features, Applications

Low in height; (1.3 mm) suitable for thin equipment. Superior heat-resistant glass sealing
Wide frequency range. Suitable for solder reflow.

Frequency Range 3.5 MHz - 25 MHz Frequency Range - 120.0MHz STAMode N DARD SPEC IFICA ION(Fundamental) S Operation Fundamental, AT Operation Mode T 40MHz Operating Temperature 60 C (See Options) 120MHz (3rd overtone) Operating Temperature -10C +60C Storage Temperature -55C to +to 125 C (See Options) Storage Temperature -40C to Options) +85C Frequency Tolerance 50 ppm max. (See Frequency Stability over Temp. 50 ppm max. (See Options) Frequency Tolerance 25C 50ppm max. (See Options) Equivalent Series Resistance 20050ppm W for 3.5 MHz < F Options) < 4.0 MHz Frequency Stability over Temp. max. (See (ESR) Maximum 150 W for 4.0 MHz < F Equivalent Series Resistance 80 W max. for F < MHz 100 W for 6.0 MHz < 10.0 MHz (ESR) Fundamental 50 W max. for 80 W for 10 MHz < 14.0 MHz 3rd Overtone 100 W max. 50 W for 14 MHz <F< MHz Shunt Capacitance C 7pF max. 0 Shunt Capacitance 7 pF max. Load Capacitance 18pF (See Options) Load Capacitance p F (See Option) Drive Level 100W max Drive Level 100 W max. @ Aging 25C per Year 5ppm max. @ 25 Aging C First Year pp m max. Insulation Resistance: 500M W min. 100Vdc 15V Insulation Resistance M W min. at 100 Vdc 15V Environmental, and mechanical specifications, see appendix C. Group 2. Marking, see appendix G. Tape and Reel, see appendix H.(1,000 pcs / reel) Reflow profile, see appendix E. Recommended handling, see appendix F. Application notes see appendix A.

ABMM3 - Frequency CL - ESR - Temperature - Tolerance - Stability - Packaging XX.XXXX MHz Load cap. or -S for Series RXXX (value W) -E for 0C -B for -20C -C for -30C -N for -35C -D for -40C -2 for 20ppm -3 for 25ppm -4 for -Z -T (Tape & Reel)

NOTE: Left blank if standard All specifications and markings subject to change without notice

29 Journey Aliso Viejo, CA 92656 USA (949) 448-8484 E-MAIL: abinfo@ INTERNET ADDRESS:


Some Part number from the same manufacture Abracon Corporation
ABMMABMM1 7.0 X 5.0 X 1.3 MM Ceramic Seam Sealed 8.0MHz to 125MHz
ABS13 6.90 X 1.4 X 1.3 MM Molded Plastic 32.768kHz
ABS15 6.80 X 3.0 X 1.55 MM Molded Plastic 32.768kHz
ABS25 8.7 X 3.8 X 2.5 MM Molded Plastic 30kHz to 165kHz
ABSM 13.2 X 4.7 X 4.3 MM Molded Plastic 3.5MHz to 70MHz
ABSM3Series 13.0 X 4.3 X 6.2 MM HC49US, Resistance Welded 3.57MHz to 60MHz
ABSM5 13.0 X 5.0 X 5.1 MM HC49US, Resistance Welded 3.57MHz to 60MHz
ACF21UACF45USeries 11.05 X 4.65 X 13.5 MM 10.7MHz
ACH Hcmos/ttl Compatible Half-size Dip Crystal Clock Oscillators
ACO Hcmos/ttl Compatible Full-size Dip Crystal Clock Oscillators
ACOL1ACHL1 20.2 X 12.6 X 5.08 MM Full,half-size Dip, 2.5Vdc, Hcmos 1MHz to 85MHz
ACOLACHL 20.2 X 12.6 X 5.08 MM Full,half-size Dip, 5Vdc or 3.3Vdc 32.768kHz to 200MHz
ACOPACHPSeries 20.2 X 12.6 X 5.08 MM Full,half-size Dip, 5Vdc or 3.3Vdc Programmable 1MHz to 125MHz
ACOS 20.2 X 12.6 X 5.08 MM Full-size Dip, 5Vdc, Sine Output 8MHz to 40MHz
ACOW Hcmos/ttl Compatible Full-size Dip Crystal Clock Oscillators
ACT TTL Output Full-size And Half-size Dip Crystal Clock Oscillators
ACTAHT 20.2 X 12.6 X 5.08 MM Full,half-size Dip, 5Vdc, TTL 500kHz to 70MHz
ACTX1018 Ttl/cmos And Sine Wave Crystal Oscillators Temperature-compensated Xtal Oscillators
ACVX1220 Ttl/cmos Full-size Dip 5 VDC or 3.3 VDC Voltage-controlled Crystal Oscillators
ACVX1220ACVX1220L 20.2 X 12.6 X 8.0 MM Full-size Dip, 5Vdc or 3.3Vdc, CMOS/ttl 1MHz to 160MHz

ALD750LKP1A : Ceramic SMD Crystal Clock Oscillator

ALD750LRP1A : Ceramic SMD Crystal Clock Oscillator

AISC-1008F-6R8J-T : Surface Mount Unshielded Power Inductors

AISC-1008-R56J-T : Fixed Inductors, Coils, Choke 560nH 400mA * Ceramic Core, Wirewound; INDUCTOR 560NH 400MA 2% SMD Specifications: Inductance: 560nH ; Tolerance: 2% ; Package / Case: * ; Packaging: * ; Type: Ceramic Core, Wirewound ; Current: 400mA ; Mounting Type: * ; Q @ Freq: 45 @ 100MHz ; Frequency - Self Resonant: 450MHz ; DC Resistance (DCR): 1.33 Ohm Max ; Shielding: Unshielded ; Applications: High Frequ

ASA1-16.000MHZ-L-T : 16MHz Oscillator Crystal And Oscillator XO (Standard); OSC 16.000 MHZ 2.5V SMD Specifications: Frequency: 16MHz ; Package / Case: 4-SMD, No Lead (DFN, LCC) ; Packaging: Tape & Reel (TR) ; Type: XO (Standard) ; Operating Temperature: -40C ~ 85C ; Frequency Stability: 50ppm ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ASFLMB-12.288MHZ-LR-T : 12.288MHz Oscillator Crystal And Oscillator MEMS (Silicon); OSC MEMS 12.288 MHZ SMD Specifications: Frequency: 12.288MHz ; Package / Case: 4-SMD, No Lead (DFN, LCC) ; Packaging: Cut Tape (CT) ; Type: MEMS (Silicon) ; Operating Temperature: -40C ~ 85C ; Frequency Stability: 50ppm ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ABLS-14.3594MHZ-20-R50-T : 14.3594MHz Crystal Crystal And Oscillator Surface Mount; CRYSTAL 14.3594MHZ 20PF SMD Specifications: Frequency: 14.3594MHz ; Load Capacitance: 20pF ; Package / Case: HC49/US ; Packaging: Digi-Reel ; Frequency Tolerance: 50ppm ; Mounting Type: Surface Mount ; Operating Mode: Fundamental ; Operating Temperature: 0C ~ 70C ; Type: MHz Crystal ; Lead Free Status: Lead Free ; RoHS Sta

ABLS-24.576MHZ-L4QF-T : 24.576MHz Crystal Crystal And Oscillator Surface Mount; CRYSTAL 24.57600 MHZ 18PF SMD Specifications: Frequency: 24.576MHz ; Load Capacitance: 18pF ; Package / Case: HC49/US ; Packaging: Cut Tape (CT) ; Frequency Tolerance: 30ppm ; Mounting Type: Surface Mount ; Operating Mode: Fundamental ; Operating Temperature: -40C ~ 125C ; Type: MHz Crystal ; Lead Free Status: Lead Free ; RoH

ABFM1-187.500MHZ-L-P : IC,CRYSTAL OSCILLATOR,1-CHANNEL,30MHZ-280MHZ,LLCC,6PIN,CERAMIC Specifications: Device Type: Clock Generator

ABM81-20.999MHZ-10-3H : QUARTZ CRYSTAL RESONATOR, 20.999 MHz Specifications: Package / Form Factor: Surface Mount, ROHS COMPLIANT, HERMETIC SEALED, ULTRA MINIATURE, CERAMIC, SMD, 4 PIN ; Features / Standards: RoHS, Lead-Free ; Frequency: 21 MHz ; Load Capacitance: 10 pF ; Drive Level: 0.0100 milliwatts ; ESR: 50 ohms ; Operating Temperature: -10 to 60 C (14 t

ABM10AIG-24.000MHZ-4Z-T3 : CRYSTAL 24MHZ 10PF SMD Specifications: Family: Crystals ; Manufacturer: Abracon-LLC ; Series: ABM10AIG ; Packaging: Cut Tape (CT)  ; Type: MHz Crystal ; Frequency: 24MHz ; Frequency Stability: ±50ppm ; Frequency Tolerance: ±30ppm ; Load Capacitance: 10pF ; ESR (Equivalent Series Resistance): 60 Ohm ; Operating Mode

Same catergory

CDCF2510 : CPU/Memory Specific. 3.3v Phase-lock Loop Clock Driver. Designed to Meet PC133 SDRAM Registered DIMM Rev. 0.9 Spread Spectrum Clock Compatible Operating Frequency 25 MHz to 140 MHz Static Phase Error Distribution at 66 MHz to 133 MHz 125 ps Jitter (cyccyc) at 66 MHz to 133 MHz |70| ps Available in Plastic 24-Pin TSSOP Phase-Lock Loop Clock Distribution for Synchronous DRAM Applications Distributes One Clock.

CDCFR83DBQ : PLL-Based Clock Buffers (Zero-Delay). ti CDCFR83, 533MHz Direct RAMbus (TM) Clock Generator.

CDCR81DBQ : PLL-Based Clock Buffers (Zero-Delay). ti CDCR81, Direct RAMbus Clock Generator.

CGS3317 : Clock Circuits. CMOS Crystal Clock Generators. The CGS3317, CGS3318 and CGS3319 devices are designed for Clock Generation and Support (CGS) applications to 110 MHz. The CGS331x series of devices are crystal controlled CMOS oscillators requiring a minimum of external components. The 331x devices provide selectable output divide ratio (and selectable crystal drive level). The circuit is designed to operate.

CGS74B2525 : General Purpose/. 1-to-8 Minimum Skew Clock Driver. This minimum skew clock driver is designed for Clock Generation and Support (CGS) applications operating well above 20 MHz (33 MHz 50 MHz) The device guarantees minimum output skew across the outputs of a given device and also from device-to-device Skew parameters are also provided as a means to measure duty cycle requirements as those found in high.

FQA : Quartz Crystals. 6 X 3.5mm Ceramic Resin Sealed SMD. Low Cost Fundamental to 40 MHz Resin Sealed Tape and Reel (2,000 pcs. STD) Pb Free OPTIONS PARAMETERS Frequency Range Frequency Stability Over Operating Temp Range Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) Load Capacitance (CL) Drive Level Aging per year MAX (unless otherwise noted) ~ 67.000 MHz 100 PPM pF ~ Series (Customer.

ICS8737 : Dividers. Lowskew Divide-by-1, Divide-by-2 Clock Generator. 2 divide by 1 differential 3.3V LVPECL outputs; 2 divide by 2 differential 3.3V LVPECL outputs Selectable differential CLK, nCLK or LVPECL clock inputs CLK, nCLK pair can accept the following differential input levels: LVDS, LVPECL, LVHSTL, SSTL, HCSL PCLK, nPCLK supports the following input types: LVPECL, CML, SSTL Maximum output frequency: 650MHz.

ICS87946 : Dividers. Lowskew Divide-by-1, Divide-by-2 Clock Generator. 10 single ended LVCMOS outputs, 7 typical output impedance LVPECL clock input pair PCLK, nPCLK supports the following input levels: LVPECL, CML, SSTL Maximum input frequency: 250MHz Output skew: 200ps (maximum) Part-to-part skew: 500ps (typical) Multiple frequency skew: 350ps (maximum) 3.3V input, outputs may be either or 2.5V supply modes to 70C ambient.

NBSG53AMNR2 : Divider. 2.5V/3.3V Sige Selectable Differential Clock And Data D Flip-flop/clock Divider With Reset And Ols, Package: Qfn, Pins=16.

PJ-A2960 : XO PECL Oscillators. Surface Mount 6 J Leads Frequency Range (Mhz) : 125.0 - 312.5 Output/input : Fast Edge Differential, 3.3V.

PLL205-13 : Amd Based Chipset FTGS , Freq. Progr., Power Mgt, Wdt, Drive Ctrl, SST.

POI : Frequency Range = 2.000 MHZ to 12.000 MHZ ;; Frequency Stability = 12.0 X 5.0 X 10.0 .47 X .20 X .39 ;; Dimensions Mm/inch = ;;.

SC3039B : Frequency = 286.0 ;; = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3. Quartz SAW Frequency Stability Fundamental Fixed Frequency Very Low Jitter and Power Consumption Rugged, Miniature, Surface-Mount Case Low-Voltage Power Supply (3.3 VDC) This digital clock is designed for use with high-speed CPUs and digitizers. Fundamental-mode oscillation is made possible by surface-acoustic-wave (SAW) technology. The design results.

SM5168Series : PLL Frequency Synthesizers. The SM5168 series are PLL synthesizer ICs fabricated using NPC's Molybdenum-gate CMOS process. They provide several combinations of reference and comparator frequency divider ratios, set in master-slice, making them ideal for frequency synthesizers in IF stages of mobile communications devices. They also feature a lock detect signal output (LD). to 3.6V.

TX125 : Frequency Range = 1.00 to 800.00 MHZ ;; Frequency Stability = ±0.5 PPM ;; Dimensions Mm/inch = 36.1 X 27.2 X 10.2 1.4 X 1.1 X .40 ;;.

V418MEM1 : Package Style = MINI-16M-LOW ;; Frequency (MHz) = 403 to 433 ;; N@10KHz (dBc/Hz) = -114 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 12 ;; Power (dBm) = 0.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 13.

HMC764LP6CE : Fractional-N Synthesizer With Integrated VCO SMT, 7.3 - 8.2 GHz The HMC764LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) Frequency Synthesizer with an Integrated Voltage Controlled Oscillator (VCO). The input reference frequency range is 100 kHz to 220 MHz while the advanced delta-sigma modulator design in the fractional synthesizer.

HMC-T2100B : 10 MHz To 20 GHz Portable Synthesized Signal Generator The HMC-T2100B is a battery powered, portable test equipment solution designed to fulfill your signal generation needs in the field or on the bench. The HMC-T2100B provides the highest output power, lowest harmonic levels and broadest frequency range amongst portable signal generators of its size.

0-C     D-L     M-R     S-Z