Details, datasheet, quote on part number: MP1-3Q-2Q-30
PartMP1-3Q-2Q-30
Category
DescriptionPsu 5v 200a
CompanyN.A.
DatasheetDownload MP1-3Q-2Q-30 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Current share on all outputs with ratings A or greater Remote sense on all outputs with ratings greater than 2 A Overload protection on all outputs Voltage adjustment on all outputs Margining on all single output modules Input-OK-signal and status indicator LED Global DC OK signal and status indicator LED Global and individual module inhibits/enable 1 year warranty Forced air cooling, field replaceable fan Isolated 5 V bias voltage Power factor correction IEC EN61000-3-2 harmonic distortion compliance CISPR 22, EN55022 Curve B conducted / radiated EMI European CE Mark requirements Optional VME timing and system DC OK module Low leakage option for medical applications Immunity - EN61000 Level 3

Operating temperature: to 50C (start @ 0C) (derate each output linearly to 40C max. with rear air option) Shock/Vibration: Mil-Hdbk 810E Humidity: 95% non-condensing Storage temperature: to +85C Temperature coefficient: 0.02% per C Cooling: Internal DC fan (Field replaceable) (P/N 73-688-0001)

UL CSA IEC VDE BABT UL1950 CSA22.2 No. 234 Level 5 IEC950, Class 1 EN60950, Compliance BS 7002 Certificate and report Mark

ASIA 6F., CDW Building 382-392 Castle Peak Road Tsuen Wan, N.T., Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426

EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, Telephone:+44(0)1384-842211 Facsimile:+44(0)1384-843355

Adjustment range................... 10% min. all outputs Margining............................... 4-6% nom.1 Overall reg.............................. 20 mV max. (36 W modules 4% max.) Ripple..................................... RMS: or 10 mV, whichever is greater Pk-Pk: or 50 mV, whichever is greater Bandwidth limited to 20 MHz Dynamic response................. or 100 mV, with 25% load step. Recovery time........................ To within in <300 sec. Overcurrent protection........... Single, main of dual output module 105-120% of rated output current. Aux output of dual output module 105-140% of rated output current. Triple output module Internally protected Short circuit protection........... Protected for continuous short circuit. Recovery is automatic upon removal of short Overvoltage protection........... Single output modules (measured at sense V 122-134% connection) V 110-120% Dual output module V 110-120% Triple output module. No overvoltage protection provided. Recycle the AC input voltage to reset OVP circuit Reverse voltage protection............................... 100% of rated output current Thermal protection................. All outputs disabled when internal temp exceeds safe operating range. >5 ms warning (AC OK signal) before shutdown Remote sense........................ 0.5 V total drop Single wire parallel................. Current share to within 2% of total rated current 2 DC OK.................................... -8% of nominal for any monitored output 2 Minimum load......................... Not required on single or triple output modules. 10% required on main of dual output modules3 Housekeeping Bias voltage............................ 5 VDC @250 mA max. present whenever AC input is applied (Consult factory if higher output current required) Module inhibit......................... TTL, isolated, singles and dual (both outputs) only Switching frequency............... 250 kHz Output/Output isolation.......... >1 Megohm VME signal option board........ POR signal

Notes: 1 Single output modules only. 2 Single and main of dual output modules only. 3 Contact factory for optional preload if required.

Input voltage........................... 85-264 VAC 120-350 VDC Frequency.............................. 47-440 Hz Inrush current......................... 40 A peak max. Efficiency................................ 70-80% typ. @ full case load Power factor........................... 0.99 typ. meets EN61000-3-2 Turn-on time........................... on 1.5 sec typ., Inhibit / Enable 150 ms typ. EMI filter standard.................. CISPR 22 EN55022 Level "B" EMI filter (low leakage option)... CISPR 22 EN55022 Level "A" Leakage current standard...... 2.0 mA max. @ 240 VAC Leakage current (low leakage option).............. 300 A max. @ 240 VAC Radiated EMI......................... CISPR 22 EN55022 Level "B" Holdover storage.................... 20 ms minimum (independent of input VAC) AC OK.................................... >5 ms early warning min. before outputs loose regulation Full cycle ride thru (50 Hz) Harmonic distortion................ Meets EN61000-3-2 Isolation.................................. Meets EN60950 Global Inhibit/Enable.............. TTL, Logic "1" and Logic "0" Input fuse (internal)................ 20 A Warranty................................. 1 year

Case Size (inches): 10, 5 available slots, 400 W max. 11, 5 available slots, 600 W max. 10, 6 available slots, 800 W max. 11, 7 available slots, 1000 W max. & MP1 Only) Slot #6

Option Code: = no options 1 = rear air exhaust 3 = global enable 5 = option package (options M = low leakage N = low leakage plus option P = low leakage plus option R = low leakage plus option 5 (MP1 Only) Slot #7

or 3 Digit Code See Output Currents Next Page

Use " for Standard Remote Sense Use / " After any module using Remote Sense with o-ring diode (redundancy)

*For custom parallel configurations, contact Astec.

Notes: 1 Omit digits that do not apply. 2 Specify modules from lowest number of outputs to highest.(Single/Dual/Triple) 3 If number of outputs are equal, specify modules from highest to lowest power increments. If power increments are equal, specify in decending alphabetical order (1A, B, C...). 4 Always start with Slot 1. 5 All MVP model configurations created using this selection guide are standard MVP products with standard availability and lead times.


 

Related products with the same datasheet
MP1-3L-2L-30
Some Part number from the same manufacture
MP240D2 Relay Solid State 2a
MP2E-IL-4LQ-00 Psu 400w 4 O/p
MP425C/NC Mould Release Jaxa 1ltr
MP4401
MP5010GN Ic-1.22v Reference
MP6-3E-00 Psu 5v 120a
MP601 Insert/extract Tool
MP6901
MP73 Led Clip And Bush
MP7524AAN Ic-8-bit DAC
MP7545BLN Ic-12-bit DAC
MP7670AS
MP8-3E-30 Psu 5v 160a
MPC1185
MPC1225H
MPC1230H
MPC1238
MPC1241H
MPC1710AML
MPC17A34RVMEL
MPC2005
 
0-C     D-L     M-R     S-Z